Location: KP Tower
Client: LAAB
Completed: 2017
Project Manager: Benson Chan
Area: Duplex Office. Approximately 2000 sq. ft.

Project Summary

ABB KNX system has been installed in the original LABB office for lighting and shading control. Client wanted to enrich the new office with smart living elements by adapting the ABB KNX system currently using. Therefore, we adopted Crestron system to control lighting and curtain in new office.

In Addition, we installed the Octopus attendance system based on client’ requirement.

Meanwhile, we helped LAAB to enhance operational effectiveness by adding Ring doorbell, upgrading PABX system as well as improving WiFi networking.

  • Crestron Automation System – Smart Control of Lighting and Shading
  • Access Control and Attendance System
  • PABX System
  • Networking and Structured Cabling Service

Solution Highlights

All-In-One Automation System

– The client can adjust the office luminosity by turning on/off the lighting and rolling up/down the curtains through smartphone or tablet. Meeting mode and some customized modes are set up for different purposes, for example, pre-set to roll down the curtains at 7am to prevent the computers’ exposure to sunlight.

Octopus Card Access Control and Attendance System

– Staffs can go in or out by using Octopus Card while the attendance is recorded by the system.

PABX System and
Structured Cabling Service

– Panasonic PABX System is installed for the internal transfer between colleagues.

– CAT-6 cable is used for the 30 network ports in the new office to ensure network stability.